Cechya 0080 Download The File

Click Install (Windows 10, 8, 7, and Vista) or Continue Anyway (Windows XP).

Introduction Version 3.1.0.0 of the Aten USB-serial converter driver has been tested successfully on 64-bits version of Microsoft Windows Vista, Windows 7, Windows 8 and Windows 8.1.

Note: Only install this driver when you connect the Bridgemate Pro server to a USB port using the Aten USB-serial converter which is supplied with the Bridgemate Pro server.

If the Bridgemate Pro server uses a direct serial connection port or a USB-serial converter of another brand, do not use this driver.

IMPORTANT: This driver should only be used on 64-bit versions of Microsoft Windows Vista, Windows 7, Windows 8 or Windows 8.1.

On 32-bit operating systems.

Procedure In case a driver is already installed, you should uninstall the current driver first.

How to uninstall the current driver: Make sure the Aten USB to Serial converter is connected to one of the USB ports of your computer.

Click Properties.

Click on Device Manager in section Tasks (Windows VistaWindows 7), or click tab Hardware and then press Device Manager (Windows XP).

Right-mouse click on USB to serial bridge (the name may be slightly different depending on the current driver version), then click Uninstall.

In case an option Delete the driver software for this device is shown, check this option.

Install the 64-bits driver: Make sure the Aten USB to Serial converter is NOT connected to the computer.

Cechya 0080 Download The File

Download the file Open the downloaded file and follow the instructions on the screen.

After the installation has completed, connect the USB to Serial converter to a USB port of your computer.

The converter will automatically be recognized and is ready to use.

You can now connect your Bridgemate Pro server through the converter.

Additional information There is no additional information available for this article.

We use the CP2102 USB-to-UART Bridge Controller in several of our products to provide USB connectivity while communicating via a simple serial protocol.

It is the key component of our: Pololu USB-to-serial adapter with CP2102 and is also used in our,, and.

These CP2102-based products feature a mini-B connector, so you will need a to connect them to one of your computers USB ports.

Once the appropriate drivers are installed for your system, the CP2102 will look like a standard serial port.

Before you connect your Pololu CP2102 device to a computer running Microsoft Windows, you should install its drivers: Download the (4MB zip).

IMPORTANT: You must extract the zip archive into a temporary directory.

DO NOT attempt to double-click or run any of the files until you have extracted them.

Open the temporary directory and run the appropriate executable.

If you have a 64-bit operating system, you should run pololu-cp2102-setup-x64.

The Afghan Whigs Rar.

If you have a 32-bit operating system, you should run pololu-cp2102-setup-x86.exe.

During the installation, Windows will ask you if you want to install the drivers.

Cechya 0080 Windows 7 Driver